Encoders & Sensors > Incremental Rotary Encoders
Incremental Rotary Encoders
Rotary Encoders
The Rotary Encoder is small, thin, and lightweight incremental encoder can be installed in tight spaces.
- Outer diameter ϕ30 mm and ϕ40 mm
- Incremental type
- Hollow shaft or round shaft type
- 100~4000 P/R
- Voltage, line driver, or open collector output
Product Lineup
Encoder |
Output Shaft Type |
Resolution (P/R) |
Open Circuit Type |
|
Round Shaft Hollow Shaft |
100~4000 |
Voltage Line Driver Open Collector |
|
Product Features
Small, Thin, and Lightweight Incremental Encoder
Since these rotary encoders are small, thin and lightweight, they can be installed in tight spaces. Encoder resolutions vary from 100 to 4000 P/R. These rotary encoders are available in round shaft type or hollow shaft type with voltage, line driver, or open collector output.
| Round Shaft Type | Hollow Shaft type | |
|---|---|---|
| Mounting dimensions: φ30 mm |  |
 |
| Mounting dimensions: φ40 mm |  |
 |
Actual Position, Speed and Rotation Direction of the Mechanism can be Detected
By installing a rotary encoder on a mechanism, a preventative maintenance system for that mechanism can be created.
Can Be Installed to Suit the Mechanism
By installing a rotary encoder on a mechanism, a preventative maintenance system for that mechanism can be created.
Aligning Mechanical Home and Z-Phase Signal Position is Easy
The Z-phase signal is output at the position where the shaft flat (round shaft type) or the fixing screw (hollow shaft type) has rotated 180˚ from the encoder connector. Use this as a guide when aligning the mechanical home and the Z-phase signal position.
Encoder Connection Cable
Use the encoder connection cable to connect to the host controller.
Mounting Bracket (for 30 mm Round Shaft Type Only)
The round shaft type rotary encoder can be installed by using the mounting bracket.
Product Number
Applications
Conveyor
Measure the speed, position, and direction of the belt.
Index Table
Detecting the position of the index table.
Videos
